1
D-ILA Projector
“JVC Projector Calibration Software 14”
INSTRUCTIONS
About the marks being used in this manual
refers to as explanations/instructions for NZ900/NZ800 series.
refers to as explanations/instructions for NZ700 series.
refers to as explanations/instructions for NZ500 series.
Items without markings are for all models.
“JVC Projector Calibration Software” is a tool that enables you to use the projector in an optimal condition at all times
with the use of a commercially available optical sensor.
Calibration Feature
By performing a precise calibration with easy procedures in optimizing the projected images, which changes
depending on the installation conditions, such as installation position of the main unit, lens shift/zooming position,
you can enjoy high-quality images that are suitable for the installation conditions. You can also maintain the projector
in an optional state by correcting distortions, such as those in the color balance, which are caused by the prolonged
use of the projector.
Reference Meter Emulating Function
Adjust the Spyder calibration results to closely match the reference sensor measurements.
Import Picture Adjustment Data
Enables you to import the picture adjustment data from a PC to the projector.
Gamma Data Adjustment Feature
Allows you to adjust the gamma curve of the projector according to your preference.
* “JVC Projector Calibration Software” is designed to adjust gamma and color display by changing the settings of the
projector.
* Please note that setting of the projector is changed by using this software.
● Projectors that support calibration
Models supported:
NZ900/NZ800 series: DLA-NZ900, DLA-NZ800, DLA-RS4200, DLA-RS3200, DLA-N1188, DLA-N988
NZ700 series: DLA-NZ700, DLA-RS2200, DLA-N888, DLA-N800, DLA-N899
NZ500 series: DLA-NZ500, DLA-RS1200, DLA-N788, DLA-N700, DLA-N799
● PC (computer)
● LAN cable
● Optical sensor
Models supported: SpyderX2 Ultra/Elite, SpyderX Elite/Pro by Datacolor
About “JVC Projector Calibration Software”
Required Equipment
B5A-4642-11
To Next Page
Need help?
General
