2
To make use of this software, your hardware and software must meet the following specifications.
*1 Install .NET Framework 4.6.2 or later or enable the function from the Control Panel. For details on how to install,
refer to the Microsoft website.
Caution
The above requirements do not guarantee that this software will work on your computer.
Macintosh systems are not supported.
1 Install the software on your PC (P. 3)
2 Connect the main unit and your PC via LAN cable
3 Projector and PC Setup (P. 4)
* Check here to see if your model supports the setting of Network Password.
4 Start up the software (P. 7)
5 Connect the optical sensor
6 Calibration (P. 8)
System Requirement
PC (Computer)
OS supported
Windows 10 (32-bit, 64-bit)
Windows 11 (64-bit)
Memory 4 GB or more
Storage capacity 500 MB or more
Required functions
.NET Framework 4.6.2 or later
*1
USB port
LAN port
Operation Procedure for the Calibration Adjustment
To Next Page
Loading...
