11
Playing Back Discs/USB Devices
Programming the Playing Order
—Program Play
You can arrange the playing order of tracks (up to 99) before
you start playback.
• Program Play cannot be used for files on a USB mass
storage class device.
• Resume does not work for Program Play.
1 While playback is stopped, activate Program Play.
2 Select the tracks you want for Program Play.
• For music files:
1 Select a group number.
2 Select a track number.
3 Repeat steps 1 and 2.
• For Audio CD:
1 Select track numbers.
3 Start playback.
To check the programmed contents
While playback is stopped...
To modify the program
While playback is stopped...
To exit from Program Play
While playback is stopped...
• The program contents will remain.
To enter numbers:
Examples:
To enter number 5, press [5].
To enter number 10, press
[10].
To enter number 25, press
[ 10], [2], then [5].
To enter number 136, press
[ 10], [ 10], [1], [3], then
[6].
Playback starts in the order you have
programmed.
To skip:
To pause/restart: To stop:
Remote
ONLY
PRGM
CD PROGRAM
To erase the last track:
To erase the entire
program:
To add another track to
the program:
• Opening the disc tray will
also erase the program.
Repeat step 2 on page 11.
In the programmed order.
In the reverse order.
2 sec
PRGM
RANDOM
Canceled
RD-HA3[A].book Page 11 Friday, June 1, 2007 5:37 PM
To Next Page
Loading...
