5
Basic Operations
Basic Operations
Turning on the System
The STANDBY lamp on the main unit turns off.
• When the power is supplied from an AC outlet...
– The System also turns on by pressing one of the source
buttons.
– While QP Link is activated, the System turns on and sets
the source to LINE by starting playback on the external
device connected to the LINE IN terminal. (See page 16
for details.)
To turn off (on standby) the System
The STANDBY lamp on the main unit lights in red.
• A small amount of power is always consumed even while
on standby.
Adjusting the Volume
You can adjust the volume level from level 0 (VOLUME 0)
to level 35 (VOLUME 35).
To drop the volume in a moment
Remote control
Main unit
SET
AUTO
STBY
MUTING
SUBWOOFER
VOLUME
+, –
CHARACTER
SIZE
DISPLAY
DIMMER
MID/
TREBLE
VOLUME
+, –
CLOCK/
TIMER
x
4
CANCEL
STANDBY/ON
SUBWOOFER
LEVEL +, –
VOLUME +, –
DISPLAY
Source
buttons
Remote control: Main unit:
Remote control: Main unit:
To restore the volume,
press again, or
adjust the volume level.
For private listening
Connect a pair of headphones to the PHONES jack on the
main unit. The sound will no longer come out of the
speakers. Be sure to turn down the volume before
connecting or putting on the headphones.
• Disconnecting the headphones will activate the
speakers again.
Remote
ONLY
RD-HA3[A].book Page 5 Friday, June 1, 2007 5:37 PM