JVC RD-HA3B - Connecting and Playing iPod

14
Listening to an iPod
Connecting the iPod
Playing the iPod
1 Set the volume level to the minimum.
2 Start playing the iPod.
The iPod is turned on and starts playing.
3 Adjust the volume to the desired listening level.
To pause/restart
To select a track
To locate a particular portion—Search Play
While playing...
To return to the normal playback, release the button.
To turn off the iPod (sleep mode)
• Turning off the System* or changing “iPod” to another
source also turns off the iPod.
* Turning off the System may not turn off the iPod
depending on the current source.
Insert the plug into the iPod terminal on the System with
the arrow mark side down and align the arrow mark with
5 mark on the front panel.
• Do not insert the plug forcibly into the iPod terminal
with the arrow mark side up; otherwise, the plug and/or
the terminal may be damaged or broken.
iPod
(not supplied)
Connecting cable
for iPod (supplied)
Stand for iPod
(supplied)
5 mark
arrow mark
•Press 4 twice
quickly to skip to the
beginning of the
previous track.
• You can scan tracks
in fast-forward/fast-
reverse while holding
the button.
2 sec.
RD-HA3[A].book Page 14 Friday, June 1, 2007 5:37 PM