1-10 (No.MB519)
3.1.3 Removing the CD mechanism assembly
(See Fig.3 and 6)
(1) Remove the two screws E attaching the CD mechanism
assembly. (See Fig.3)
(2) Disconnect the card wire connected to CN403 from tuner
board. (See Fig.6)
(3) Disconnect the card wires connected to CN407
and CN408
from equalizer amp board. (See Fig.6)
Fig.6
3.1.4 Removing the equalizer amp board
(See Fig.7)
(1) Remove the four screws F attaching the equalizer amp
board. (See Fig.7)
Fig.7
Tuner boaard
Equalizer amp board
CN403
CN407CN408
FF
To Next Page
Loading...
