JVC RV-NB10BJ - Reassembling the Control Cam

(No.MB519)1-25
3.3.7 Reassembling the Control Cam
(See Figs.13 to 15)
The head assembly is adjusted in the direction of the left side (di-
rection of the forward), and it inserts according to the part of the
hole s of the control cam and the section s' of the chassis base
assembly.
Fig.13
Fig.14
Fig.15
Control cam
s (hole)
s'
Chassis base assembly
s'
Chassis base assembly
s (hole)
Control cam (Surface)