JVC RV-NB10BJ - Disassembly Procedures; Main Unit Disassembly

1-8 (No.MB519)
SECTION 3
DISASSEMBLY
3.1 Main body
3.1.1 Removing the rear cabinet
(See Fig.1 to 3)
(1) Remove the six screws A (both side) attaching the side
protector by 6 angle wrench. (See Fig.1)
(2) Remove the eight screws B (both side) attaching the woof-
er, and then disconnect the speaker wires. (See Fig.2)
(3) Remove the ten screws C attaching the rear cabinet, and
then disconnect the grand wire from tuner board. (See
Fig.3)
Fig.1
Fig.2
Fig.3
AA
BB
C
E
CK