39
Available DSP Modes According to the Speaker Arrangement
Available DSP modes will vary depending on how many speakers are used with this receiver.
Make sure that you have set the speaker information correctly (see page 29).
When the SUB ROOM and SPEAKERS SUB ROOM indicators are lit on the front panel
You can only use 3D-PHONIC modes for the main room source, without respect to the center/rear speaker connection.
Speaker arrangements
TV
TV
TV
TV
TV
Front
speaker
Front
speaker
Front
speaker
Front
speaker
Front
speaker
Front
speaker
Front
speaker
Front
speaker
Center
speaker
Rear
speaker
Rear
speaker
Rear
speaker
Available DSP modes
Each time you press DSP MODE, the DSP modes change as follows:
THEATER 1 \ THEATER 2 \ HALL 1 \ HALL 2 \
LIVE CLUB \ DANCE CLUB \ PAVILION \
5 CH STEREO (when using 5 speakers) or 4 CH STEREO (when using 4 speakers)* \
3D ACTION or 3D DIGITAL \ SURR. OFF (DSP OFF) \
(Back to the beginning)
To activate the Surround mode, press SURROUND ON/OFF button so that the
SURROUND ON/OFF lamp on the front panel button lights up.
Notes:
• If the settings for the center and the rear speakers are changed to “NONE” (see page 29),
the Surround mode will be canceled.
• When both of the Surround mode and DSP mode are deactivated, “SURR. OFF” appears
on the display.
*
“5CH STEREO” is selected when setting the center speaker to “LARGE” or “SMALL,” and
“4CH STEREO” is selected when setting the center speaker to “NONE” (see page 29).
THEATER 1 \ THEATER 2 \ HALL 1 \ HALL 2 \
LIVE CLUB \ DANCE CLUB \ PAVILION \
3D ACTION or 3D DIGITAL \ SURR. OFF (DSP OFF) \
(Back to the beginning)
To activate the Surround mode, press SURROUND ON/OFF button so that the
SURROUND ON/OFF lamp on the front panel button lights up.
Notes:
• If the setting for the center speaker is changed to “NONE” (see page 29), the Surround
mode will be canceled.
• When both of the Surround mode and DSP mode are deactivated, “SURR. OFF” appears
on the display.
THEATER 1 \ THEATER 2 \ HALL 1 \ HALL 2 \
LIVE CLUB \ DANCE CLUB \ PAVILION \
3D ACTION or 3D DIGITAL \ SURR. OFF (DSP OFF) \
(Back to the beginning)
Note:
Surround mode cannot be used when only the front speakers are connected.
HEADPHONE j HEADPHONE DSP
Note:
To use the HEADPHONE or HEADPHONE DSP mode, deactivate both of the front speakers
(see page 19).
Rear
speaker
Center
speaker
EN37-49.RX-9010VBK[J]f 01.2.15, 0:15 PM39
To Next Page
Loading...
Need help?
General
