To Next PageTo Next Page
Need help?Do you have a question about the JVC RX-9010VBK and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Input Impedance | 47 kOhms |
| Tuning range | FM |
| Frequency Response | 20Hz to 20kHz |
| Input sensitivity | 200mV (line) |
| Video Connections | composite, SVHS |
| Speaker load impedance | 4-16 ohms |
Information for the customer regarding model and serial numbers.
General warnings about electrical hazards and appliance exposure.
Regulatory compliance statement for digital apparatus.
Recommendations for air circulation around the apparatus.
Highlights of the receiver's capabilities like Dolby Digital and DTS.
Crucial safety guidelines for power, operation, and handling.
Identification of all controls and terminals on the front panel.
Pre-installation checks for components and environment.
Instructions for connecting FM and AM antennas.
Detailed guide for connecting front speakers.
Guidelines for connecting audio/video sources via analog.
Specifics for connecting VCRs, and video sources.
Instructions for connecting TV and DBS tuners.
Configuring digital input terminals for connected devices.
Step-by-step guide for installing USB drivers.
Setup for RF rod antenna and IR signal transmitter.
Connecting power cord and installing batteries.
Speaker connection requirements for the sub-room.
How to turn the main room power on and off.
How to turn the sub-room power on and off.
Details on power states and indicator lights.
How to stop main room audio and operations.
Controlling the output of main room front speakers.
Speaker setup options for equalization.
Adjusting sound for low volume listening and bass enhancement.
Selecting direct audio path and setting sleep timer.
Controlling sub-room power and selecting operation mode.
How to stop sub-room audio and operations.
Choosing the audio source for the sub-room.
Controlling the volume level for the sub-room.
Enabling or disabling front speakers for the sub-room.
Muting the audio output for the sub-room.
Assigning front speakers to main or sub-room.
Balancing audio output between left and right speakers.
Registering subwoofer connection status.
Controlling the subwoofer volume level.
Configuring speakers for optimal surround effect.
Adjusting center speaker delay for surround.
Adjusting crossover frequency based on speaker size.
Reducing LFE signal level to prevent distortion.
Assigning connected digital sources to terminals.
Choosing between analog and digital input signals.
Choosing the correct video input terminal.
Customizing source labels for MD recorder and DBS tuner.
Displaying disc title, performer, and track information.
Automatic recall of sound settings for each source.
Saving volume levels for quick recall.
Manually tuning FM and AM radio stations.
Storing and recalling radio stations by preset numbers.
Explanation of Dolby Surround and DTS Digital Surround modes.
Explanation of Digital Signal Processor modes.
3D sound effect modes for enhanced audio.
DSP mode for headphone listening experience.
Fine-tuning individual speaker output levels.
Fine-tuning individual speaker output levels for DAP.
Fine-tuning speaker output levels for DAP modes.
Fine-tuning speaker levels for combined modes.
Fine-tuning speaker levels for 3D-PHONIC modes.
Fine-tuning speaker levels for 5/4 CH Stereo modes.
Enabling and setting up DVD MULTI playback.
Accessing and displaying the on-screen menu.
Activating surround and DAP modes via menu.
Modifying equalization settings through the on-screen menu.
Configuring surround and DSP modes via menu.
Activating Line Direct through the on-screen menu.
Activating Bass Boost through the on-screen menu.
Controlling subwoofer output via the on-screen menu.
Tuning radio stations using the on-screen menu.
Storing radio presets using the on-screen menu.
Configuring general settings through the on-screen menu.
Showing CD/MD disc information on TV.
Searching for discs by performer, title, or genre.
Automatic power control for connected components.
Automatic recording synchronization with CD playback.
Physical connections for TEXT COMPU LINK system.
Viewing CD/MD disc details on the television.
Interacting with the disc information display.
Finding discs by searching performer or title.
Storing CD disc information into player memory.
Connecting IR transmitter and AV COMPU LINK.
Details on S-video, composite, and component video cables.
Operating video devices using the remote control.
Automatic DVD playback and TV input synchronization.
Controlling JVC audio devices via remote.
Operating CD player and changer functions.
Operating VCR and DVD player functions.
Setting remote control codes for TVs.
Setting remote codes for CATV/DBS tuners and VCRs.
Lists of manufacturer codes for various devices.
Lists of manufacturer codes for CATV converters and VCRs.
Information on finding authorized JVC service centers.
What JVC provides and what the customer must do for service.
