To Next PageTo Next Page
Need help?Do you have a question about the JVC RX-206BK and is the answer not in the manual?
General| Type | Stereo Receiver |
|---|---|
| Number of Channels | 2 |
| Speaker load impedance | 8 ohms |
| Tuning range | FM: 87.5-108 MHz, AM: 522-1611 kHz |
| Frequency Response | 20Hz-20kHz (±1dB) |
| Input Sensitivity | 200mV (line) |
| Signal to noise ratio | 70 dB |
Proper placement for ventilation, temperature, and interference avoidance.
Instructions for handling power cords safely.
Warning against inserting metallic objects and general safety.
Specific warnings to reduce risks of electric shocks or fires during installation.
Control of JVC equipment via Compu Link terminals.
Automatic source switching for connected components.
Synchronized tape recording with other components.
Control of CD auto-changer with receiver.
Connecting a turntable to the PHONO jacks.
Connecting a CD player to the CD jacks.
Connecting a tape deck to TAPE 1 jacks.
Connecting a second tape deck to TAPE 2/VIDEO SOUND jacks.
Connecting a VCR or TV to TAPE 2/VIDEO SOUND jacks.
How to connect speaker wires to terminals.
Connecting the first pair of speakers to the receiver.
Connecting the second pair of speakers to the receiver.
Connecting the included AM loop antenna.
Connecting an optional AM outdoor antenna.
Connecting an FM antenna with a coaxial cable.
Connecting an FM antenna with a flat twin-lead cable.
Power switch and speaker selection switches.
Source, Surround, and Tuner Display indicators.
Remote Sensor and RECEIVED indicator functions.
Bass, Treble, Balance, and Volume controls.
Tuner buttons and Surround switch.
Initial steps for turning on and selecting speakers.
Choosing audio sources and adjusting sound volume.
Modifying bass, treble, and speaker balance.
Tuning in AM and FM radio stations.
Storing favorite radio stations in memory.
Automatically scans and presets radio stations.
How to use numeric keys for station selection.
Recording audio from various sources onto tape.
Using three-head decks for monitoring recordings.
Aiming the remote and general usage guidelines.
Controls for receiver power and other JVC components.
Adjusting volume and fading sound.
Controlling AM/FM broadcasts and presets.
Remote control functions for turntables and CD players.
Remote control for TAPE 1 and notes for TAPE 2.
Controlling CD auto-changer and VCR with remote.
Type and quantity of batteries for remote.
When and how to replace remote control batteries.
Technical specifications for the amplifier.
Technical specifications for the FM tuner.
Technical specifications for the AM tuner.
General specs like power, dimensions, and weight.
