JVC RX-206BK User Manual

Using
Auto-Memory
Auto-Memory
The Auto-Memory function lets
you
scan a serres of
radio
stations, and
preset
the
ones
you
want
into the receiver's
memory. The receiver will scan
radio frequencies and
preset
the stations, as they are
tuned, with ascending channel
numbers.
(O
Turn the
receiver
on.
@
Press the AM or the FM Source Select button.
G)
Use
the TUNING key to
find
the
lowest frequency
you
want
to
start scanning
from.
@
Press
the
AUTO MEMORY button.
The MEMORY indicator
lights
and
- -
CH appears
(-
-
blinks)
in the Tuner Display Window
for
about
five
seconds.
@
Using the Numeric
keys,
enter
the
lowest
channel
number
(1
to 40)
you
want to
assign
a
preset.
lmportant!
You must
enter
the channel
number while the
MEMORY indicator
is lighted. lf the indicator turns off too
soon,
press
the AUTO MEMORY button and
start again.
When a radio station
is
tuned
in,
scanning
stops.
The
TUNED
indicator
lights,
and the
first
preset
channel
number
and
the
frequency
of
the station tuned in are displayed alternately
for
about
five
seconds.
When this station
is
preset,
scanning
starts again.
@
lf
you
do
not want to
preset
that
station,
press
the
AUTO
MEMORY button
while the channel
number and
frequency
are displayed
alternately. The
receiver will start
scanning
again.
This
process
continues automatically
until all
40 channels
are
filled or the upper
frequency
limit is reached.
Uslng
Numerlc Keys
Preset stations are set
into the receiver's
memory and
recalled
using the
Numeric keys.
To indicate
numbers 1 to 10,
press
the appropriate
key. To
indicate numbers
11
to
40,
you
need to use
the +
10 key
and
one other
key. See the
following examples:
To indicate 17:
press
the
+10
key,
then the
7 key.
To indicate 20:
press
the +10
key, then the
10 key.
To indicate 25:
press
the +10 key twice,
then the 5
key.
To indicate 40:
press
the +
10 key three times,
then the
10 key.
Page
11

JVC RX-206BK Specifications

General

Brand	JVC
Model	RX-206BK
Category	Receiver
Language	English