JVC TH-M337B User Manual

- 11 -
Tip:
• While in OPTICAL/COAXIAL mode, if there’s no sound output from the unit and the OPTICAL/
COAXIAL lights flashes quickly, you may need to activate PCM
or Dolby Digital
Signal output on
your source device (eg. TV, DVD or Blu-ray play
Bluetooth Operation
Pair Bluetooth-enabled Devices
The first time you connect your Bluetooth device to this player, you need to pair your device to this player.
Note:
- The operational range between this player and a Bluetooth device is approximately 8 meters
(without any object between the Bluetooth device and the unit).
- Before you connect a Bluetooth device to this unit, ensure you know the device’s capabilities.
- Compatibility with all Bluetooth devices is not guaranteed.
- Any obstacle between this unit and a Bluetooth device can reduce the operational range.
- If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing
mode automatically.
1 While in ON mode, press the SOURCE button on the unit repeatedly or BT button on the remote
control to select Bluetooth mode. The Blue indicator will light flash.
2 Activate your Bluetooth device and select the search mode. “TH-M337B” will appear on your
Bluetooth device list.
- If you cannot find the unit, press and hold the "
BF
/PAIR" button on the remote control to be
searchable. After the “Pairing” voice prompt and the Blue indicator will flash rapidly.
3 Select “TH-M337B” in the pairing list. After the “Paired” voice prompt, the system is successfully
connected and the Blue indicator will light up solidly.
4 Begin playing music from the connected Bluetooth device.
To disconnect the Bluetooth function, you can :
- Switch to another function on the unit.
- Disable the Bluetooth function on your device.The device is successfully disconnected from the
unit after the “Disconnected” voice prompt.
- Press and hold the “
BF
/PAIR” button on the remote control.
Tips:
• Enter "0000" for the password if necessary.
• If no other Bluetooth device pairs with this player in 2 minutes, the player will reconnect to the
previous connection.
• The player will also be disconnected when your device is moved beyond the operational range.
• If you want to reconnect your device to this player, place it within the operational range.
• If the device is moved beyond the operational range, when it is brought back, please check if the
device is still connected to the player.
• If the connection is lost, follow the instructions above to pair your device to the player again.
Listen to Music from Bluetooth Device
- If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can
listen to the music stored on the device through the soundbar'.
- If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the
soundbar's remote control to play music stored on the device.

JVC TH-M337B Specifications

Power

sound bar power supply	AC120V~ 60Hz
sound bar power consumption	30 W
subwoofer power requirements	AC120V~ 60Hz
subwoofer power consumption	30 W

Audio

sound bar output power	30 W x 2
sound bar audio input sensitivity	700 mV
sound bar frequency response	120Hz - 20KHz
subwoofer output power	60 W
subwoofer frequency response	40 Hz - 120 Hz

Electrical Characteristics

sound bar speaker impedance	8 Ω x 2
subwoofer impedance	4 Ω

Bluetooth

bluetooth version	V 4.2
bluetooth maximum power transmitted	<20 dbm
bluetooth frequency bands	2402 MHz ~ 2480 MHz

Wireless Subwoofer

2.4g hz wireless subwoofer maximum power transmitted	<10 dbm
2.4g hz wireless subwoofer frequency bands	2400 MHz ~ 2483 MHz

Remote Control

remote control distance	6 m
remote control angle	30°
remote control battery type	CR2025

Dimensions and Weight

sound bar unit dimension	952 x 63 x 65.7 mm
subwoofer dimension	465 x 255 x 95 mm