JVC TH-M337B User Manual

- 12 -
1. Pair your device with the player.
2. Play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
- To pause/resume play, press the
BF
/PAIR button on the remote control.
- To skip to a track, press the
H
,
G
buttons on the remote control.
USB Operation
1 Insert the USB device.
2 Press the SOURCE button on the unit repeatedly or press the BT button on the remote control to
select USB mode.
3 During playback:
- To pause or resume play, press the
BF
/ PAIR
button on the remote control.
- To skip to the previous/next le, press the
H
,
G
buttons on the remote control.
Tips:
• The unit can support USB devices with up to 32 GB
of memory.
• This unit can play MP3 / WAV.
Troubleshooting
To keep the warranty valid, never try to repair the system yourself. If you encounter problems when
using this unit, review the following before requesting service.
• No power
Ensure that the AC cord is properly connected.
Ensure that there is power at the AC outlet.
Press standby button on the remote control or soundbar to turn the soundbar on.
• No sound
Increase the volume. Press Volume Up on the remote control or on the right side of the soundbar.
Press MUTE on the remote control to ensure the soundbar is not muted.
Press source buttons to select a different input source.
When using either of the Digital input, if there is no audio:
- Try setting the TV output to PCM or
- Connect directly to your Blu-ray/other source, some TVs do not pass through digital audio.
Your TV may be set to variable audio output. Conrm that the audio output setting is set to FIXED
or STANDARD, not VARIABLE. Consult your TV’s user manual for more detailed information.
If using Bluetooth, ensure that the volume on your source device is turned up and that the device
is not muted.
• Remote control does not work
Before you press any playback control button, rst select the correct source.
Reduce the distance between the remote control and the unit.
Insert the battery with its polarities (+/-) aligned as indicated.
Replace the battery.
Aim the remote control directly at the sensor on the front of the unit.

JVC TH-M337B Specifications

Power

sound bar power supply	AC120V~ 60Hz
sound bar power consumption	30 W
subwoofer power requirements	AC120V~ 60Hz
subwoofer power consumption	30 W

Audio

sound bar output power	30 W x 2
sound bar audio input sensitivity	700 mV
sound bar frequency response	120Hz - 20KHz
subwoofer output power	60 W
subwoofer frequency response	40 Hz - 120 Hz

Electrical Characteristics

sound bar speaker impedance	8 Ω x 2
subwoofer impedance	4 Ω

Bluetooth

bluetooth version	V 4.2
bluetooth maximum power transmitted	<20 dbm
bluetooth frequency bands	2402 MHz ~ 2480 MHz

Wireless Subwoofer

2.4g hz wireless subwoofer maximum power transmitted	<10 dbm
2.4g hz wireless subwoofer frequency bands	2400 MHz ~ 2483 MHz

Remote Control

remote control distance	6 m
remote control angle	30°
remote control battery type	CR2025

Dimensions and Weight

sound bar unit dimension	952 x 63 x 65.7 mm
subwoofer dimension	465 x 255 x 95 mm