13
Operating the TV
7 To operate a JVC’s TV
You can perform the following operations on the TV.
You can use the remote control to operate not only this unit but also JVC TVs.
• Refer also to the manuals supplied for the TV.
• To operate the TV, aim the remote control directly at the remote sensor on the TV.
TV: Turn on or off the TV.
TV VOL +/– with SHIFT
pressed and held:
Adjust the volume.
TV/VIDEO: Set the input mode
(either TV or VIDEO).
TV CH +/– with SHIFT
pressed and held:
Change the channels.
EN_THP7-P3[U]4.book Page 13 Tuesday, April 4, 2006 5:08 PM
To Next Page
Loading...
