To Next Page

To Previous Page

Some countries space AM stations 9 kHz apart, and some

countries use 10 kHz spacing.

You can only change the AM tuner interval spacing while

selecting AM as the band.

On the center unit ONLY:

7To change the interval spacing into 10 kHz

Press 8 while holding down 7.

7To change the interval spacing into 9 kHz

Press 3 while holding down 7.

1 Press FM/AM repeatedly to select

the band.

Example: When the system is tuned in to 810 kHz.

2 Press TUNING 9/( repeatedly

until you find the frequency you

want.

When you hold down the button until the system starts

searching for stations and then release it, the system

stops searching automatically when a station of

sufficient signal strength is tuned in to.

NOTE

• When an FM stereo program is received, the ST indicator

lights on the display window.

The buttons described below are used on pages 36 and

37.

Number

buttons

Setting the AM tuner interval

spacing

Manual tuning

Tuner operations

EN_THP7-P3[U]4.book Page 36 Tuesday, April 4, 2006 5:08 PM

Questions and Answers:

Need help?

Do you have a question about the JVC TH-P3 and is the answer not in the manual?

JVC TH-P3 Specifications

General

Weight	3000 g
Audio system	Dolby Digital
Dimensions (WxDxH)	435 x 70 x 308 mm
Media types supported	DVD-Video, DVD-RW, DVD-R, +RW / +R, CD / CD-R/RW, SVCD / VCD
Surround speaker weight	1380 g
Equalizer	Yes
RMS rated power	360 W
Audio output channels	5.1 channels
Audio formats supported	MP3
Satellite speaker frequency range	90 - 20 Hz
Video formats supported	DivX
Analog signal format system	NTSC, PAL
I/O ports	USB SCART (Composite, RGB, S-Video-Y, S-Video-C)
Optical disc player type	DVD player