EasyManua.ls Logo

JVC TH-P3

JVC TH-P3
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
You can change the language used in the setup menus.
See “Menu description” below.
Basic operation on the setup menus
7While stopped
1 Press SET UP with SHIFT pressed.
2 Follow the instructions that
appear on the TV screen.
: Language menu (LANGUAGE)
7 MENU LANGUAGE
Some DVDs have their own menus in multiple languages.
Select the initial menu language*.
7 AUDIO LANGUAGE
Some DVDs have multiple audio languages.
Select the initial audio language*.
7 SUBTITLE
Some DVDs have multiple subtitle languages.
Select the initial subtitle language*.
7 ON SCREEN LANGUAGE
Select the language shown on the TV screen when
operating this system.
* When the language you have selected is not recorded to a
disc, the original language is automatically used as the
initial language.
NOTE
See “The language codes list” (see page 35) for the code of
each language, such as “AA”, etc.
: Picture menu (PICTURE)
7 MONITOR TYPE
You can select the monitor type to match your TV when
you play DVDs recorded in the pictures height/width ratio
of 16:9.
16:9/16:9 MULTI (Wide television conversion)
Select this when the aspect ratio of your TV is 16:9 (wide
TV).
4:3 LB/4:3 MULTI LB (Letter Box conversion)
Select this when the aspect ratio of your TV is 4:3
(conventional TV). While viewing a wide screen picture,
the black bars appear on the top and the bottom of the
screen.
4:3 PS/4:3 MULTI PS (Pan Scan conversion)
Select this when the aspect ratio of your TV is 4:3
(conventional TV). While viewing a wide screen picture,
the black bars do not appear, however, the left and right
edges of the pictures will not be shown on the screen.
NOTE
Even if “4:3 PS” or “4:3 MULTI PS” is selected, the screen size
may become “4:3 LB” or “4:3 MULTI LB” with some DVDs.
This depends on how DVDs are recorded.
When selecting “MULTI” options as the monitor type for the
multi-color system TV, the system outputs PAL or NTSC
video signal according to the disc/file, regardless of the scan
mode setting (see page 16).
Using the setup menus
Menu description
Cursor
(3/2/Y/5)/
ENTER
Ex.: 16:9 Ex.: 4:3 LB Ex.: 4:3 PS
Setting DVD preferences
EN_THP7-P3[U]4.book Page 33 Tuesday, April 4, 2006 5:08 PM

Table of Contents

Related product manuals