11
English
Basic operations
On the remote control:
Press STANDBY/ON .
On the center unit:
Press .
When DVD is selected as the source (see page 12), the following
messages will appear on the TV screen.
NOTE
• The STANDBY lamp goes off when the power is turned on, and the
lamp lights when the power is turned off.
• A small amount of the power is consumed even when the power is
turned off. This is called standby mode and the STANDBY lamp
lights in this mode. Unplug the power cord from the AC outlet to turn
the power off completely.
• You can also turn on the system by pressing the following buttons;
• 0 on the center unit
• One of the source selecting buttons on the remote control
• 3 on the center unit.
The buttons on the remote control are used to explain most of the
operations in this manual. You can use the buttons on the center
unit same as on the remote control for operations unless
otherwise noted.
The buttons described below are used on
pages 11 to 13.
STANDBY/ON
REPEAT
DIMMER
A-B RPT SLEEP
SURROUND
TV
TV/VIDEO
1
4
7
10 0
2
5
8
3
6
9
10
ENTER
TOP MENU/PG MENU/PL
SET UP SETTING
FL DISPLAY
ON SCREEN
DVD/CD MEMORY FM MODE
TUNING SLOW
RETURN
FM/AM AUX
PLAY MODE CANCEL
TV CHANNEL
LEVEL AUDIO VOL
TV VOL
MUTING
ANGLE
AUDIO
TITLE/
GROUP
SCAN MODE
VFP
SHIFT SPK-LEVEL
BASS/
TREBLE
ZOOM
SUBTITLE
DVD THEATER SYSTEM
REMOTE CONTROL RM-STHS33J
Turning the system on/off
• “OPEN”/“CLOSE”:
Appears when opening or closing the disc tray.
• “NOW READING”:
Appears when the system is reading the disc information.
• “REGION CODE ERROR!”:
Appears when the Region Code of the DVD VIDEO does not
match the code the system supports. The disc cannot be
played back.
• “NO DISC”:
Appears when no disc is loaded.
• “CANNOT PLAY THIS DISC”:
Appears when unplayable disc is loaded.
TH-S33-11[C].book Page 11 Thursday, March 31, 2005 8:02 PM
To Next Page
Loading...
Need help?
General
