20
GB
This instruction manual explains the basic instructions for operating this unit. Unless otherwise stated, all
operations described are based on remote control use.
General Operation
Standby / ON
When you rst connect the unit to the mains socket, the unit will be in Standby mode.
• During Standby mode, the POWER indicator of the subwoofer will be o. Press
on the unit or on the remote control to switch the unit on. The display will show
“WELCOME“, and then the last used mode. The sound level will x on level 15 after
every time the unit is switched on.
• After the unit is idle for about 10 seconds, the display will show “--“.Press any button
(except and MUTE) to exit the idle mode.
• Press on the unit or on the remote control again to switch the unit back to Standby
mode. The display will show “GOODBYE“, and then turn o.
Alternatively,
• press AUX on the remote control repeatedly to select between AUX 1 and AUX 2 mode.
• press DIGITAL on the remote control repeatedly to select between OPTICAL and COAXIAL mode.
• press HDMI on the remote control repeatedly to select between HDMI 1, HDMI 2 and ARC mode.
• Press PAIR on the remote control to select BT (Bluetooth®) mode directly.
• To switch the unit o completely, remove the mains plug from the mains socket.
• Please turn the unit o completely to save energy when not in use.
Selecting Modes
Press SOURCE on the unit repeatedly to select between AUX 1, AUX 2, BT (Bluetooth®),
OPTICAL, COAXIAL, HDMI 1, HDMI 2, and ARC mode.
Automatic Power O Function
The unit automatically turns to Standby mode after about 10 minutes if the TV or the
external unit is disconnected, switched o or the volume is too close to mute.
TH-WL709H_S_IB_170628_will.indd 20 28/6/2017 3:13 PM
To Next Page
Loading...
Need help?
General
