22
GB
Bluetooth® Operation
Pairing the unit with a Bluetooth® device to listen to music:
First time pairing
1. During On mode, press SOURCE on the unit repeatedly or press PAIR on the remote
control to select Bluetooth® mode. The display will show BT. Then PAIRING will ash in
the display.
2. Activate your Bluetooth® device and select the search mode. “TH-WL709X” will appear
on your Bluetooth® device list.
3. Select “TH-WL709X” and enter “0000” for the password if necessary. After pairing, the
display will show PAIRED.
Pairing a new device after rst time pairing
1. In Bluetooth® mode, press and hold SOURCE on the unit or PAIR on the remote
control to clear all pairing setting. The unit will enter pairing mode, and PAIRING will
ash in the display.
2. Follow step 2-3 to pair your Bluetooth® device.
Bluetooth® device already in the connection memory
1. After entering the Bluetooth® mode, the display will show BT and then BT READY.
2. The unit will automatically reconnect with the Bluetooth® device. After pairing, the
display will show PAIRED.
To disconnect the Bluetooth® function, switch to another function on the unit or disable the
function from your Bluetooth® device. You may also press and hold SOURCE on the unit or
PAIR on the remote control to clear all pairing setting. PAIRING will ash in the display
and the unit is now ready for pairing. Follow step 2-3 in “First time pairing“ above to pair
your Bluetooth® device.
• The operational range between the unit and the device is approximately 6 metres.
• Before connecting a Bluetooth® device to the unit, ensure you know the device’s capabilities.
• Compatibility with all Bluetooth® devices is not guaranteed.
• Any obstacle between the device and the unit can reduce operational range.
• Keep this player away from other electronic devices that may cause interference.
• The player will also be disconnected when your device is moved beyond the operational range.
NFC (Near Field Communication) Operation
Pair your NFC-enabled mobile device directly with this unit by just a single tap.
1. Activate NFC on your mobile device.
2. Tap the mobile device on the icon of the unit. Your unit will switch to Bluetooth®
mode automatically. The display will show BT. The unit will enter pairing mode, and
PAIRING will ash in the display.
3. Operate your mobile device for playback features.
4. To disconnect, tap the mobile device on the icon of the unit to disconnect or disable
Bluetooth® from your mobile device.
• The NFC function only works with mobile devices that support NFC technology.
• You may need to remove your mobile devices case to connect using NFC.
TH-WL709H_S_IB_170628_will.indd 22 28/6/2017 3:13 PM
To Next Page
Loading...
Need help?
General
