To Next Page

To Previous Page

Adjusting the Speaker Level Settings and Eects

Adjusting the Volume

• Press VOL + / – to adjust the volume.

• If you wish to turn the sound o, press on the remote control. The display will show

“MUTE”. Press again, or press VOL + / – on the unit or on the remote control to

resume normal listening.

Adjusting the Subwoofer Volume Level

Press SUB + / – repeatedly to adjust the bass volume level from SUB MIN (–10) to SUB MAX

(10).

Adjusting the Treble Volume Level

Press TREB + / – repeatedly to adjust the treble volume level from TREB MIN (–12) to TREB

MAX (12), each press will increase or decrease 2 level.

DTS TruSurround

Press DTS TSHD to activate DTS TSHD, DTS WOW or DTS OFF.

DTS TruVolume

Press DTS TVOL to switch between TVOL ON or TVOL OFF.

This feature is designed to level out the volume to provide a consistent loudness experience across

sources. When watching a TV program and the adverts come on the volume level of the adverts is often

louder than the program you are watching. This feature will level out the volume levels between the

TV program and adverts. After TVOL (TruVolume) is switched ON, it can adjust the volume levels while

watching TV or movies, which might cause the volume level dropping from time to time. If you notice this

happening we recommend switching the feature o.

AUX / Coaxial / Optical / HDMI Operation

There are COAXIAL / OPTICAL / AUX 1(L/R) / AUX 2 and HDMI sockets located at the rear

of the unit. Analogue audio sound signals from other sources can be connected to the unit

through these sockets.

1. Before connecting to the mains socket, ensure all the connections are completed.

2. While in the On mode, press SOURCE on the unit repeatedly to select between AUX 1,

AUX 2, BT (Bluetooth®), OPTICAL, COAXIAL, HDMI 1, HDMI 2, and ARC mode.

Alternatively,

• press AUX on the remote control repeatedly to select between AUX1 and AUX2 mode.

• press DIGITAL on the remote control repeatedly to select between OPTICAL and COAXIAL mode.

• press HDMI on the remote control repeatedly to select between HDMI1, HDMI2 and ARC mode.

• Press

PAIR on the remote control to select BT (Bluetooth®) mode directly.

3. Operate your audio device directly for playback features.

TH-WL709H_S_IB_170628_will.indd 21 28/6/2017 3:13 PM

JVC TH-WL709H User Manual

Questions and Answers: