31
Item Setting value Functions and settings
AUTO RETURN
^
When the camera is not operated within the duration set in ATIMEB, it will
automatically return to the state set in AMODEB.
Note ：
● This function only works normally when the model name on the serial number
plate of RM-P2580 is RM-P2580(A).
MODE ● OFF
HOME
A.PAN KEY
A.PATROL KEY
This item sets the operation after Auto Return.
OFF :Auto Return is disabled.
HOME :Returns to the home position.
A.PAN KEY :Returns to the operation that was set using the [RM.A.PAN
KEY]. (A Page 39)
A.PATROL KEY :Returns to the operation that was set using the [RM.A.PATROL
KEY]. (A Page 39)
Memo ：
● When using this function, set the [DIP SW4] at the rear of RM-P2580 to
AONB.
TIME ● 1min
2min
3min
5min
10min
20min
30min
60min
This item sets the time to return the operation with Auto Return.
Memo ：
● When [MODE] item is set to AOFFB, A- - -B will be displayed and settings is
disabled.
TK-C686E_EN.book Page 31 Tuesday, December 4, 2007 4:45 PM
To Next Page
Loading...
Need help?
General
