39
Item Setting value Functions and settings
AUTO PAN/TRACE VIDEO (continued)
W.BALANCE ● AT W- W
ATW- N
AWC
This item sets the white balance adjustment function. You can adjust the
illumination within the color temperature range of 2,300K to 10,000K.
ATW-N :This is the Auto-Tracking White Balance mode. (Automatic color
temperature tracking). The camera adjusts the white balance
automatically according to the color temperature of the illumination.
(Color temperature range of 3,200K to 8,000K)
ATW-W :This mode supports an even wider range of color temperature than
AATW- NB. (Color temperature range of 2,300K to 10,000K)
AWC :This is the Auto White Control (automatic white balance adjustment)
mode. A<SET>AWC EXECB will be displayed. Press the [SET] button
to activate AWC and adjust white balance.
Memo ：
●
When set to
A
AT W- N
B
,
A
AT W- W
B
, [R GAIN] and [B GAIN] are displayed as
A
- - -
B
. Hue cannot be adjusted.
●
If [B&W MODE] under [CAMERA ALC] item is set to
A
B&W
B
, [W.BALANCE], [R
GAIN], [B GAIN] items are displayed as
A
- - -
B
. Hue cannot be adjusted.
R GAIN 0 to 255
(● 76)
Adjusts the R (red) hue during AWC.
The larger the number, the redder the color becomes.
B GAIN 0 to 255
(● 71)
Adjusts the B (blue) hue during AWC.
The larger the number, the bluer the color becomes.
RM.A.PAN KEY ● A.PAN
A .PAT ROL
A.TRACE
Press the [AUTO PAN] button on the remote control to set the operating function.
A.PAN :Auto Pan function
A.PATROL :Auto Patrol function
A.TRACE :Auto Trace function
RM.A.PATROL KEY A.PAN
● A.PATROL
A.TRACE
Press the [AUTO PATROL] button on the remote control to set the operating
function.
A.PAN :Auto Pan function
A.PATROL :Auto Patrol function
A.TRACE :Auto Trace function
TK-C686E_EN.book Page 39 Tuesday, December 4, 2007 4:45 PM
To Next Page
Loading...
Need help?
General
