JVC VideoMovie GR-A30 - Recording the Date;Time;Age; Battery Insertion and Replacement; Date;Time;Age Setting and Recording

RECORDING
THE DATE/TIME/AGE
Battery insertion
This battery powers the date/time/age function.
Warning on lithium battery
•Dispose of used battery promptly.
• Keep away from children.
• Do not disassemble and do not dispose of in fire.
1. Lift the cover of the CLOCK BATTERY compartment, on
top of the VideoMovie.
2. Insert
the provided lithium battery with the plus(+) side up.
3. Close the cover on the unit it clicks.
Note:
•Switch off the unit's power before inserting the battery.
Battery replacement
The battery lasts for about one year. When the lithium battery
warning ( c~K) appears in the viewfinder, this battery needs
to be replaced.
Note:
Switch
off the unit's power before removing
old
battery.
Replace the CR2025 lithium battery as follows:
1. Remove old battery by pressing knob .
2. Insert new CR2025, plus side(+) up.
3.
SI ide the cover back until it clicks.
Date/time/age setting
Replace battery with Matsushita type CR 2025
only.
Use
of another battery may present risk of
fire and explosion.
Before adjusting
the date, time and age for the first time or after replacing the batteries, indicating the clock
needs
to be set.
CD Switch the unit's power on, JAN. 1.00 will appear
in the viewfinder. Press PAUSE button to enter
rehearsal mode.
® Press the SELECT button - the month blinks.
@ Press
the SET button to choose the corr ect
number.
© Press
the SELECT button to select the next item
to change, with the i tem selected changing in the
following sequence:
~Month - Day - Year - Hour - Minute--,
L Finish - Year - Day - Month~
Adjustment
Date/time/age recording
@ Repeat steps ® and @ to set all item s. After the
birth date setting has been performed, press the
SELECT button, and items will cease blinking.
Then the date, time and age will be displayed.
•The clock begins timekeeping when the minute
portion stops blinking and lights constantly.
When the date and time portions are bl inking,
the clock stops keeping time. Be sure to confirm
the time when resetting the age.
1.
The date, time, or date and age can be displayed and recorded according to the selected mode . Press the DIS·
PLAY MODE
button to cycle throught the modes in the following order:
Date/time/age display - Date/time display - Date/age display - Date display - Age display - Auto date display
2. When "Auto Date" appears in the viewfinder in the Recording Standby mode after the unit is powered, the
date will be displayed automatically and be recorded for five seconds.
3. Press
the DISPLAY ON/OFF button when you do not wish to record the date/time/age. This will remove the
items from the viewfinder. Press again to record date/time/age. Date/ time /age will reappear in the viewfinder.
Date/time/age recording indications
Date/time/age
Date/time display
Date/age display
Date display Age display
Auto date display
display
AU TO DATE II
DEC 31 8811
8 8
11
9 9 y 1 1 M II
AM 1 2 3 0
D
EC 31 8811
DEC 31 88 JI
9 9 Y 1 1 M AM 1 2 : 3 0
99 Y 1 1 M DEC 31
Auto date record
reserved
14