JVL MAC050 - Page 125

JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500 121
4.1 Installation of MacTalk
4.1.3 Update MacTalk version
MacTalk can be updated directly from the internet at any time. It is recommended always
to use the latest version of MacTalk since it support the latest features and bugs may have
been found and corrected. Below is shown how to make an update of MacTalk.
TT2342-02GB
Step 1
Choose the in the menu.
Update MacTalk Updates
Step 2
MacTalk will now check if newer version exist
on the JVL server. If a newer version exist it
will automatically be downloaded and the release
notes can be seen in the window.
Step 3
Press the button to download Download & Install
the selected latest MacTalk.
The progress counter will now rise from 0
to 100%.
The new version is now located in the same
directory as the MacTalk which was installed
in the first place.
The old version is automatically deleted.
Step 4
When the download process is finished, the status
shows “ .
Update ready”
Press “ in order to start the new version OK”
of MacTalk.
Step 5
After MacTalk have restarted the version number
of the new MacTalk can be observed in the top
of the screen.
The complete update is finished !.