JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500 23
2.4 Analogue bi position mode
2.4.1 Analogue Bi-position Mode - overall description
For primitive positioning purposes, the basic MAC motor offers the Analogue bi-position
mode. The Analogue bi-position mode offers:
The motor will move a certain distance or go to one of 2 positions depending on the volt-
age at the analogue input. The voltage at the analogue input will be seen as a digital signal
meaning either logic low or logic high.
The distance or positions can be setup in 2 internal registers and saved permanently in
the motor.
Concerning the trigger level at the input and how to change please consult Analogue in-
put, page 112
To Next Page
Loading...