JVL MAC050 User Manual

JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500 457
6.18 UL Certificate of Compliance
Note: MAC1500 and MAC3000 are UL Pending.
CERTIFICATE OF COMPLIANCE
Certificate Number
20120131-E254947
Report Reference
E254947-20070109
Issue Date
2012-JANUARY-31
William R. Carney, Director, North American Certification Programs
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at www.ul.com/contactus
Page 1 of 1
Issued to:
JVL INDUSTRI ELEKTRONIK A/S
BLOKKEN 42 3460 BIRKEROED DENMARK
This is to certify that
representative samples of
POWER CONVERSION EQUIPMENT
Power Conversion Equipment, Cat. Nos. MAC400, MAC800, followed by D,
followed by 2, 3, 5 or 6
Power Conversion Equipment Accessory, Low Voltage Expansion Modules,
Cat. Nos. MAC00-B1, MAC00-B2, MAC00-B4, MAC00-B41, MAC00-CS,
MAC00-FB4, MAC00-FC4, MAC00-FD4, MAC00-FP2, MAC00-FP4, MAC00-
FR4, MAC00-FS1, MAC00-FS4, MAC00-R1, MAC00-R3, MAC00-R4, ,
MAC00-P4, MAC00-P5, MAC00-EC4, MAC00-EI4, MAC00-EL4, MAC00-EP4,
MAC00-ES4, MAC00-EM4, MAC00-Ex4 and MAC00-EW4
Have been investigated by UL in accordance with the Standard(s) indicated on
this Certificate.
Standard(s) for Safety:
POWER CONVERSION EQUIPMENT, UL 508C
Additional Information:
See the UL Online Certifications Directory at www.ul.com/database for
additional information
Only those products bearing the UL Recognized Component Mark should be considered as being covered by UL's
Recognition and Follow-Up Service.
The UL Recognized Component Mark generally consists of the manufacturer’s identification and catalog number, model
number or other product designation as specified under “Marking” for the particular Recognition as published in the
appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL’s
Component Recognition Program, UL’s Recognized Component Mark:
, may be used in conjunction with the required
Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the
recognitions or under “Markings” for the individual recognitions.
The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL
LLC.
Look for the UL Recognized Component Mark on the product.

JVL MAC050 Specifications

General

Brand	JVL
Model	MAC050
Category	Engine
Language	English