120 JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500
4.1 Installation of MacTalk
4.1.1 Obtain the latest version of MacTalk
MacTalk is available for online purchase at:
https://www.jvl.dk/523/software-mac-motor
You will receive the MacTalk SW along with a license.
4.1.2 Installation of MacTalk
Once you have obtained the MacTalk software / commissioning tool, it is time for instal-
lation. This is done by running the downloaded MacTalk Setup file.
Ex. MAC_TALK_1_90_019_INSTALL.zip
To Next Page
Loading...