294 JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500
5.9 Expansion Module MAC00-FS1/FS4
5.9.4 Cables for the MAC00-FS4
Following cables equipped with M12 connector can be supplied from JVL.
Note 1: The illustrated cable is not twisted pair and is not recommended for noisy environ-
ment. We recommend to use a shielded twisted pair cable for noisy applications. Also
it is recommended to use a metal type connector where the screen can be terminated
to obtain optimal screening effect.
Important: Please notice that the cables are a standard type. It is not recommended to be used in
cable chains or where the cable repeatable are being bended. If this is required use a
special robot cable (2D or 3D cable). See also
Accessories, page 448 where additional
M12 connectors are shown.
MAC00-FS4 Connectors
Description JVL Order no. Picture
“IO1”
8pin
Male
“IO2”
8pin
Fe-
male
“COM”
5pin
Fe-
male
“PWR”
5pin
Male
X
RS232 Interface cable. Connects
directly from MAC00-R4 to PC
Length: 5m (197 inch)
RS232-M12-1-5-8
X
Cable (Ø5.5mm) with M12 female
5-pin connector loose wire ends
0.35mm² (22AWG) and foil
screen.
Length: 5m (197 inch)
WI1000-
M12F5T05N
X
Same as above but 20m (787
inch)
WI1000-
M12F5T20N
(X)
Note1
Cable with M12 male 5-pin con-
nector loose wire ends 0.35mm²
(22AWG) and screen.
Length: 5m (197 inch)
WI1000-
M12M5T05N
(X)
Note1
Same as above but 20m (787
inch)
WI1000-
M12M5T20N
X
Cable with M12 female 8-pin
connector loose wire ends
0.22mm² (24AWG) and screen.
Length: 5m (197 inch)
WI1000-
M12F8T05N
X
Same as above but 20m (787
inch)
WI1000-
M12F8T20N
X
Cable with M12 male 8-pin
connector loose wire ends
0.22mm² (24AWG) and screen.
Length: 5m (197 inch)
WI1000-
M12M8T05N
X
Same as above but 20m (787
inch)
WI1000-
M12M8T20N
Protection caps. Optional if connector(s) needs to be protected from dust / liquids.
X X
IP67 protection cap for M12
female connector.
WI1000-M12F-
CAP1
X X
IP67 protection cap for M12
male connector.
WI1000-M12M-
CAP1
To Next Page
Loading...