JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500 313
5.11 Expansion Module MAC00-R1/R3/R4
Determine which firmware you want to use:
Graphic programming (MAC00-RxP).
Step 2
Choose the in the menu.
Firmware update Updates
Step 3
Make sure that the checkbox
is checked.
Select the desired firmware, MAC00-RxP.
Note that there may exist more than one
version. Choose the newest version.
Press S to download the selected firmware.
The progress counter will now rise from 0
to 100%.
“Show all files”
tart
Step 4
When the download process is finished, the status
shows “ .
Also “ has changed to the actual
downloaded version meaning that the firmware in
the module is now changed permanently.
Done”
Current version”
Step 5
The on-line information shown in the lower right
corner of the MacTalk main window will now
show the complete type of firmware and version.
Step 6
The tab is now available among
the other standard tabs.
Proceed with the setup and/or programming
according to the description for each firmware
type.
MAC00-RxP
To Next Page
Loading...