23 of 28
Additional Notes
Holman Home Automations
® If STARTS are run as part of a Holman Home automation,
they will behave the same as a manually run START
® WATERING DELAYS only effect scheduled STARTS from
the KRX6 interface–STARTS running from Holman Home
automations will ignore WATERING DELAYS
® To exclude ZONES using the WATERING DELAY
function, this will need to be set using two
Holman Home automations–for example:
L If the time is 1:00 am and WATERINGDELAY is ON,
then water ZONE 1 and, if the time is 1:00 am wand
WATERING DELAY is OFF, then water ZONE 1, 2 and 3
To Next Page
Loading...
