K2 Pumps Contractor Series - Pre-Installation Guide; Pump Application and Usage; Required Materials Not Included; Technical Specifications

2 For Professional Technical Support call 1-844-242-2475
PERFORMANCE
Model HP
Discharge Flow (GPM)
Max. Lift
0 ft. 5 ft. 10 ft. 15 ft. 20 ft. 25 ft.
UTM02505K
Submersible
Utility Pump
Function
1/4 27 25 22 16 12 4 30 ft.
Non-Submersible
Transfer Pump
Function
1/4 16 14 12.2 10 6.7 2.8 30 ft.
PRE-INSTALLATION
APPLICATION
 This pump can be used as a submersible utility pump. It is suitable for draining or removing water from the
following: Dewatering in coastal areas or salt-water marine areas, drain utility sinks, flooded basements, window
wells, flat roofs, pool covers and descaling.
 This pump can be also used as a non-submersible transfer pump. It is suitable for draining or removing from the
following: Drain water heaters, boats, clogged sinks, water softeners, washing machines and utility sinks, fill
radiant heating systems.
WARNING: Risk of eye injury. Wear safety goggles at all times when working with pumps.
DO NOT USE THIS PUMP: With flammable liquids, as a sump, sewage, or effluent pump; to recirculate water or run
continuously for fountains and water features.
MATERIALS REQUIRED (NOT INCLUDED)
SPECIFICATIONS
Power supply 115V, 60 HZ., 10 Amp Circuit minimum
Liquid Temp. Range 32 to 130°F (0- 54°C)
Discharge 3/4 in. garden hose thread
Power Cord SJTW, 18AWG/3C, 10 ft.
3/4” Garden Hose (25 ft. max. length)