To Next Page
J
Jake PeckJul 29, 2025
What to do if my K2 Pumps Water Pump does not start?
- BBrittany MendozaJul 29, 2025
If your K2 Pumps Water Pump doesn't start or run, here are a few things to check: * **Blown Fuse:** Replace the fuse. * **Tripped Breaker:** Reset the breaker. * **Disconnected Plug:** Ensure the plug is securely connected. * **Corroded Plug:** Clean the plug prongs. * **Thermal Overload:** Unplug the pump for 30 minutes, then plug it back in. * **Failed Float Switch:** Replace the float switch. * **Failed Motor:** Replace the pump.
General
