EasyManua.ls Logo

K2 Pumps UTM02501K - User Manual

K2 Pumps UTM02501K
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Model: UTM02501K
OWNER’S MANUAL
DUO 2-IN-1 UTILITY PUMP
Questions, problems, missing parts? Before returning to the store call
K2 Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday
1-844-242-2475
Please register your pump now at
www.K2pumps.com
Copyright © 2021, GP Enterprises Co., Ltd. K2Man-10 (Rev. 3/09/22)
NON-SUBMERSIBLE
TRANSFER
SUBMERSIBLE UTILITY

Other manuals for K2 Pumps UTM02501K

Questions and Answers

  • S
    sdiazJul 28, 2025
    What to do if my K2 Pumps Water Pump does not start?
    • P
      Perry Mccarty Jr.Jul 28, 2025
      If your K2 Pumps Water Pump doesn't start, first, check if the circuit breaker has tripped and reset it to the "ON" position. Ensure the plug is securely connected and clean the prongs if corroded. If these steps don't work, the motor may have failed, requiring pump replacement.
  • J
    Joshua JarvisAug 7, 2025
    Why is my K2 Pumps Water Pump not pumping water?
    • C
      Christie WelchAug 7, 2025
      If your K2 Pumps Water Pump isn't pumping water, start by cleaning the screen. Next, make sure the hose is straightened, not bent, kinked, or coiled too tightly. Clean the anti-air lock hole to remove any trapped air. Also, check for debris blocking the pump inlet and remove it by opening the bottom cover.
  • S
    Steven OliverAug 17, 2025
    What to do if the flow rate is too low on my K2 Pumps Water Pump?
    • P
      Paul HuntAug 17, 2025
      If the flow rate of your K2 Pumps Water Pump is too low, try these solutions: First, straighten the hose to remove any kinks or tight coiling. Then, clean the strainer or hose to remove any blockages. Ensure the discharge hose is no longer than 25 feet and that you're using a standard garden hose, not an expandable one.

Summary

Pre-Installation

Application

Details the pump's uses as submersible utility and non-submersible transfer pump.

Materials Required

Lists necessary materials not included with the pump for installation.

Specifications

Provides technical details such as power supply, temperature range, and discharge.

Troubleshooting

Pump Does Not Start or Run

Addresses potential causes and corrective actions for the pump failing to start.

Pump Does Not Pump Water (Submersible Utility)

Identifies issues and solutions for the submersible pump not moving water.

Pump Does Not Prime (Non-Submersible Transfer)

Provides steps for resolving priming issues with the non-submersible transfer function.

Flow Rate Is Too Low

Explains common reasons for reduced water flow and how to fix them.

Warranty

K2 Pumps Limited Warranty

Outlines the terms and coverage of the manufacturer's limited warranty for the product.

What This Warranty Covers

Details the specific conditions and parts covered by the K2 Pumps Limited Warranty.

What This Warranty Does Not Cover

Specifies exclusions from the warranty, including misuse and non-residential applications.

Other Important Terms

Presents additional legal and contractual terms related to the product warranty agreement.

K2 Pumps UTM02501K Specifications

General IconGeneral
BrandK2 Pumps
ModelUTM02501K
CategoryWater Pump
LanguageEnglish

Related product manuals