Kaadas S100C - Delete Card; Opening Mode Setting

Delete User PIN Code
Access into master mode
Delete User Fingerprint (only available for S100C-5)
Access into master mode
Delete User Card
Access into master mode
Opening Mode Setting
Access into master mode
Press [1] for user setting.Then press [3] to enroll user
card. Enter 2 digital user number (00-99), and confirm
with [#] key.
Press [1] for user setting.Then press [4] to delete user
PIN code. Press [1] to delete single user. Enter 2 digital
user number (00-09), and confirm with [#] key, Voice
prompt of "Deletion succeeded".
Press [1] for user setting.Then press [6] to delete user
card.Enter 2 digital user number (00-99), and confirm
with [#] key OR Place the related RF card on the card
icon area to delete until one beep sound.
Voice prompt of "Deletion succeeded"
Press [1] for user setting.Then press [7] for opening mode
setting.Press [1] for normal mode (single verification) ,which
means opening by PIN code or fingerprint or card.
Press [2] for security mode (double verification) ,which
means opening by PIN code+fingerprint or PIN code +card
or fingerprint+card.
Press [1] for user setting.Then press [5] to delete user
fingerprint. Press [1] to delete single user. Enter 2 digital
user number (00-99), and confirm with [#] key.OR Place
the related finger on the fingerprint sensor to delete until
one beep sound. Voice prompt of "Deletion succeeded"
Place card on the card icon area until beep sound and
voice prompt "Enrollment succeed".
Press [2] to delete all users
Voice prompt of "Deletion succeeded"
Press [2] to delete all users
Voice prompt of "Deletion succeeded"
Press [2] to delete all users.
Voice prompt of "Deletion succeeded"