7. Enable Passage mode with a 2-hour time limit (the lock will remain in Passage Mode
for the next 2 hours before returning to normal operation).
9-4-1-#-0-2-#
8. Exit the programming session.
#
2.4.4 Commands Available with a Manager Authorization Code
• Add, delete, modify, lock out or re-activate users within the Manager's group.
• Assign all users in the Manager's group as "Privileged" users or normal users.
• Add, delete, modify, lock out or re-activate the Service user.
• Enable or disable Passage Mode, with or without a time limit.
• Enable or disable Lockout Mode, which removes access temporarily from all users.
4000 Programmable Electronic Pushbutton Lock
4000 Programmable Electronic Pushbutton Lock • PK2971
Page 13