X indicates that when this filter is enabled, the respective events in the left column will appear in the audit
report. By default, all audit filters are enabled.
Optional Audit Events
(3) This is the audit record of a service user whose time has “expired”, whereas “Deleted Service User” logs the
Service User who is manually deleted through the Manual Programming Mode.
Download Lock Profiles
This feature of downloading a lock configuration data profile and then transferring this info back to the PC is used for
the following reason. After programming a lock from the software via the M-Unit PDA, if the Master or a Manager
added and/or deleted any user codes at the lock pushbuttons, this updated information at the lock is not the same as
that in the PC for this lock. Now you have an opportunity to synchronize this updated lock data with its corresponding
Excel template data at the PC so that you always have the fully updated and matching lock configuration data both in
the PC and in the lock memory. If there is no matching lock ID on the PC side for this downloaded lock, this
downloaded lock profile file will be stored in a folder called Downloaded Doors as a lock configuration Excel template
file. You are free to move this file to any existing Site / Lock Configuration folder and use it to program any lock after
giving it a Lock name, Lock ID etc.
Follow the same procedure as before for downloading lock audits as described on page 38 & 39, but select Download
Door this time…follow the M-Unit screen prompts as before and download the door profile.
Transfer Downloaded Lock Profiles from the M-Unit to the PC
To Next Page
Loading...
Need help?
General
