KAESER ASK 34 User Manual

Position Name Function
17 Warning Flashes in yellow in the following events:
■ Maintenance work due
■ Warning message
Continuous yellow light after acknowledgement.
18 Voltage applied to
controller
Continuous green light when voltage is applied to the controller.
19 LOAD Continuous green light when the machine is running in LOAD.
20 IDLE Continuous green light when the machine is running in IDLE.
Flashes when the «LOAD/IDLE» toggle key is pressed.
21 Remote control Continuous green light when the machine is in remote control.
22 Time control Continuous green light when the machine is in time control.
23 ON Continuous green light when the machine switched on.
Tab. 45 LEDs
RFID reader
RFID is the abbreviation for “Radio Frequency Indentification” and enables the identification of per‐
sons or objects.
Placing a suitable transponder in front of the RFID reader of the controller will automatically acti‐
vate the communication between transponder and SIGMA CONTROL 2.
A suitable transponder is the KAESER RFID Equipment Card. Two of them have been provided
with the machine.
Typical application:
■ Users log on to the machine.
(no manual input of the password required.)
Fig. 7 RFID reader
Position Name Function
24 RFID RFID reader for the communication with a suitable RFID transponder.
Tab. 46 RFID reader
Further information More information about the use of RFID technology is provided in the SIGMA CONTROL 2 operat‐
ing manual.
4 Design and Function
4.3 Operating panel SIGMA CONTROL 2
901824 12 E
Operating Manual Screw Compressor
ASK
33

KAESER ASK 34 Specifications

General

Brand	KAESER
Model	ASK 34
Category	Compressor
Language	English