KAESER SM 7.5 User Manual

You can set the language for texts on the display. This setting will be retained even when the ma‐
chine is switched off.
1. In operating mode, switch to the main menu with the «Return» key.
2. Press the «UP» or «DOWN» keys until the current language is shown as active line (inverse):
8 8 p s i g 1 7 6 ° F
–––––––– de_DE Deutsch ––––––––
Current language (active line)
▶1 xxxxxxxxxx
Submenu
▶2 xxxxxxxxxx
Submenu
▶3 xxxxxxxxxx
Submenu
▶4 xxxxxxxxxx
Submenu
▶5 xxxxxxxxxx
Submenu
▶6 xxxxxxxxxx
Submenu
3. Use the «Return» key to switch to setting mode.
The language display flashes.
4. Move to the required language with «UP »or «DOWN».
5. Confirm the setting with the «Enter» key.
Result The display texts are now in the selected language.
Further information Detailed information can be found in the SIGMA CONTROL 2 operating manual.
7 Initial Start-up
7.10 Setting the display language
46
Operator Manual Screw Compressor
SM Tri-Voltage, SIGMA CONTROL 2 9_5875 33 USE

KAESER SM 7.5 Specifications

General

Brand	KAESER
Model	SM 7.5
Category	Air Compressor
Language	English