12
EN
Using Your X150 Camera
Preparation
Charging the battery
Before using the X150 for the first time you
should fully charge the battery.
Procedure:
Connect the X150 to a computer (or other USB POWER
source) using the USB cable provided, to charge.
If the X150 is on when charging, 3 red lights will blink until
the battery is fully charged. Only one red light will blink
if the X150 is o when charging.
A completely flat battery will take about 5 hours to fully
charge. The red light (below mini HDMI port) will turn o
when the battery is fully charged.
To Next Page
Loading...
