EasyManua.ls Logo

Kaiser Baas X90 - Setup Mode: Quality and Time-lapse; Image Quality Settings; Time-lapse Recording

Kaiser Baas X90
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
EN
X90 | User Guide
Image Quality
This allows you to set the capture quality.
Time-lapse
Time-lapse is a creative technique that records footage at a very low
frame rate. Playing it back at a higher frame rate shows a rapid change
over time. This technique is most eective when recording scenes or
objects which have a slow state of change, e.g. a sunset or a flower
blossoming
To record Time-lapse video, Select the time interval from the list,
press Record button to confirm selection.
3 Sec - Captures a frame every 3 seconds
5 Sec - Captures a frame every 5 seconds
10 Sec - Captures a frame every 10 seconds
20 Sec - Captures a frame every 20 seconds
30 Sec - Captures a frame every 30 seconds
60 Sec- Captures a frame every 60 seconds
Press M button twice to go back to the Capture screen.
Go to Video Mode if you are not in the Video Mode. You will
notice letter T at the top left corner which indicates the
Time-lapse mode is active.
Press Record button to start recording.
Note: During the recording of Time-lapse video, the timer only counts the length
of video footage recorded based on the time interval. To switch to normal Video
Record mode, go to the Time-lapse menu and select off.
KB13049 X90 Action Camera_9.06.16_trlingual.indd 17 10/06/2016 5:14 PM

Other manuals for Kaiser Baas X90

Related product manuals