Loop Record
This allows you to set the recording mode:
Note: If Video Looping is OFF, the X90 will stop recording when the SD card is full.
If the Loop mode is ON, the X90 will continue recording over the previous files
when the SD card is full.
Motion Detection
To start auto recording when the camera detects a motion.
Microphone
Select On to record audio, Select O for video only.
Auto Image Capture
Select the time interval to set the camera for Auto Image Capture.
Date Stamp
O: Turn o the date stamp display on footage.
On: Display date on footage.
On screen Display
To display information such as Recording Duration, Battery Status,
Resolution, Date etc.
Date/Time
To set the system date and time.
To Next Page
Loading...
