Kaiweets HT112B - Live Wire Testing; Product Specifications; Environmental and Operational Specs; Sampling and Display Specs

14
1)
Long press “ ” key to turn on the power, press
“ ”key to switch to “ ” function. Then press “ ”
key to switch to live function, the meter shows “Live”.
2)
The "COM" jack should remain empty. Insert the red
probe into the “ ” jack, then contact the probe the
test point.
3)
If the meter detects weak AC voltage, the green
indicator lights up, the buzzer beeps slowly, displaying
“--- L”.
4)
If the meter detects strong AC voltage, the red
indicator lights up, the buzzer beeps fast, displaying “---
H”. In general, the wire detected is the live at this time.
Customized Matching Meter Pen
This product uses customized test leads, you can go to
the
KAIWEETS
Amazon store to buy the matching test
leads set.
● Environmental conditions: CAT. III 600V
● Pollution Level
:
2
● Altitude < 2000m
● Working environment: 0~40°C(<80% RH, <10°C
non-condensing)
● Storage environment: -10~60°C(<70% RH, without
batteries)
● Temperature coefficient: 0.1Accuracy /°C(<18°C or
>28°C)
● Maximum voltage allowed between jacks: 600V
● Current protection: F600mA/250V fuse
● Sampling: approx. 3 times/second
● Display: maximum 6000 counts
● Over range indication: “OL” displayed
Specications
Live Test