4
WARNING
● In order to avoid electric shock or personal injury
caused by inaccurate reading, please replace batteries
immediately when the battery power is low.
● Do not discharge the battery by shorting it or reversing
its polarity.
● In order to ensure the safe operation and maintenance
of the meter, please take out the battery when it is not
used for a long time.
Replace Fuse
If the fuse is blown out, “ ” and “ ” will
be displayed on the screen and there will be a
continuous beeping sound.
①
Turn o the meter power and remove the test probe.
②
Remove the rubber sleeve and the 4 screws on the
four corners of the back cover.
③
Open the back cover and replace with fuse of the
same specication. Make sure that the fuse is clamped
tightly.
④
Install the back cover and lock it with screws.
Fuse: 600mA/250V, FAST
To Next Page
Loading...
