6
Smart Measurement
:
Backlight / Data hold key
●
Press this key to turn on or o the data holding function, ”H”
will be displayed on the screen.
●
Press this key for more than 2 seconds to turn on or o the
backlight.
④
Current jack
⑤
COM jack
⑥
Measuring jack except current
⑦
NCV sensor
⑧
Flashlight
Auto Power O
● No operation within 15 minutes, the meter will auto
power off to save battery energy. After automatic
shutdown, press the power button to restart.
● Cancel the auto-o function by pressing and holding
the “ ” key while turning on the meter.
● When the “ ” symbol is displayed, the auto-off
function is on.
Measurement Operation
Note:
The multimeter is very sensitive. It will be aected
by nearby magnetic fields. Without touching any
objects, there may be a reading jumping on the screen
when it is turned on. This is normal occurrence of a
digital multimeter and will not aect the measurement
results.
This measurement function is the default when power
on.
It can measure
DC voltage, AC voltage, Resistance,
Continuity.
The meter can measure automatically
without the user selecting the function.
1)
Long press “ ” key to turn on the power to smart
To Next Page
Loading...
