Full Digital Mechanical Sector Scanning Ultrasonic Diagnostic Instruments (Vet) User’s Manual V2.14
Caps 0 1 2 3 4 A B C D E F G H I J K L M
Shift 5 6 7 8 9 N O P Q R S T U V W X Y Z
Press direction keys to move cursor to point to Caps, and then press key to achieve capital and
small letter conversion; If the cursor point to Shift, press key to achieve the conversion between
the letter and punctuation;
5. Press direction keys to choose “numbers” or “characters” and press key to confirm;
6. If need modify the content, press key to quit the character input menu; press direction
keys to delete input content; press key again to retype; after the content has confirmed
press key again to exit input menu;
7. Press key to save this setting and quit setting interface.
6.3.6 Key Sound Setting
1. Freeze image, press direction keys to move cursor to “Preset”;
2. Press direction keys to enter setting interface;
3. Press direction keys to move symbol “<” to point to “Key Sound”;
4. Press direction keys to select between “On” and “Off”;
5. Press key to quit setting interface.
6.3.7 Chinese-English Setting
1. Freeze image, press direction keys to move cursor to “Preset”;
2. Press direction keys to enter setting interface;
3. Press key to switch between Chinese and English;
4. Press key to quit setting interface.
6.4 Mode Selection
In real-time mode, press key repeatedly to achieve mode switching of B, B/B, 4B, B/M and M.
6.4.1 B Mode
B mode is a basic operation mode after startup and a single-framed B mode image is displayed.
6.4.2 B/B Mode
1. In real-time mode, press key to enter B/B mode;
2. B/B image switch. Press key to enter main-menu and press direction keys to move the
cursor to “B/B Mode” and then press direction keys to switch image display; the selected
image is activated and the other one is frozen;
3. In real-time mode, press key to exit B/B mode.
6.4.3 4B Mode
1. In real-time mode, press key to enter 4B mode;
2. 4B image switch. Press key to enter main-menu and press direction keys to move the cursor
to “4B Mode”, then press direction keys to switch display among four images; the selected
image is activated and the other three are frozen;
3. In real-time mode, press key to exit 4B mode.
6.4.4 B/M Mode
1. In real-time mode, press key to enter B/M mode.
2. B/M image switch. Press key to enter main-menu and press direction keys to move cursor to
“BM Mode” and then press direction keys to switch B mode and M mode.
3. In real-time mode, press key to exit B/M mode.
To Next Page
Loading...