Kaixin MSU2 - Chapter Three System Configuration; Chapter Four Operation Condition

Full Digital Mechanical Sector Scanning Ultrasonic Diagnostic Instruments (Vet) User’s Manual V2.14
-
3
-
Chapter Three System Configuration
3.1 Typical configuration
1. Main unit 1 unit 2. 3.5MHz mechanical sector probe 1 PC
3. Power adapter 1 PC 4. Internal battery 1 PC
5. Charger 1 PC 6. Strap 1 PC
7. Socket screwdriver 1 PC 8. Soft rubber jacket 1 PC
9. Hood 1 Set (A, B, C) 10. Plastic sealed box 1 PC
11.the battery lock coin 2PCS
3.2 Optional parts
1. Video recorder
2. Video glasses Goggle06
3. Battery (5200mAH)
4. Probe telescopic frame
Chapter Four Operation Condition
4.1 Power supply
Adapter rating: 100-240V~, 1.2-0.6A, 50-60Hz
Adapter model: BJE01-40-001M
Output of adapter: DC12.8V 3.0A
Main device rating: DC12V 3.0A
4.2 Operation environment
Ambient temperature: 10℃-40℃
Relative humidity: 30%-75% (without condensation)
Atmospheric pressure: 700hPa-1060hPa.
4.3 Storage and transport
Ambient temperature: -20℃-55℃
Relative humidity: 30%-93% (without condensation)
Atmospheric pressure: 700hPa-1060hPa
Danger: Do not use this equipment where flammable gas (such as anesthetic gas,
oxygen or hydrogen) or flammable liquid (such as alcohol) are present. Failure to do so
may result in explosion.
Warning: Avoid using this equipment with high frequency operational equipment, or
danger may occur.
Attention: System should be avoided using in following environments:
1. Moist 2. Rain 3. Thunderstorm weather
4. No ventilation 5. Close to heat source 6. Direct sunlight
7. Dramatic temperature change 8. Poisonous gas
9. Corrosive gas 10. Strong shock
11. Strong electromagnetic field (e.g. MRI) 12. Radiation (e.g. X-ray, CT)
13. Defibrillators or short wave therapy equipment
Attention
:
The
main
s
voltage
is varies with different countries or regions.