Kamstrup OMNIPOWER User Manual

4 Kmstrup A/S • 55121312_E1_GB_09.2015
OMNIPOWER – single-phase
Installation manual
The phse indictions hve vrious functions. They indicte the two situtions described
below.
From the connection of the meter:
Indications L1 Indicate
On Voltge is bove minimum limit (160V))
Off Voltge is below minimum limit (160V)
Indications
Indicate
On Lod is bove minimum limit (2.3W)
Off Lod is below minimum limit (2.3W)
If the lod exceeds the minimum limit nd the meter is configured with this reding, con-
sumption will be indicted vi the qudrnt reding. The direction of the phse current is
lso indicted by the rrow of L1, regrdless of configurtion.
7-digit identifiction field
Qudrnt indiction
Module indiction
Text field
Unit field
Breker symbol
Tmper symbol
Triff indiction
Rdio network symbol
Error symbol
9-digit vlue field
Phse current indiction
Prepyment symbol
Supply voltge indiction

Kamstrup OMNIPOWER Specifications

General

Brand	Kamstrup
Model	OMNIPOWER
Category	Measuring Instruments
Language	English