To Next Page

To Previous Page

5Kmstrup A/S • 55121312_E1_GB_09.2015

OMNIPOWER – single-phase

Installation manual

Terminals OMNIPOWER OMNIPOWER ST-meter

Multi-core 7-core Mssive / terminls Multi-

core

7-core

35 mm

≥ 6 mm

≥ 2.5 mm

> 6 mm2 > 6 mm2

Screw: Pz 2 or stright slot Screw: Pz 2 or stright slot

Torch: 2.5 – 3 Nm Torch: 3 – 3.5 Nm

Load control, installation

For meters with lod control rely(s). Due to the dely in the meter, it is importnt to re-

strt the meter (off/on) when the time is set correctly in the meter. This plces the relys

in the correct position nd stops the dely timer.

With built-in radio

If the meter is supplied with integrl rdio for estblishment of remote reding, the meter

utomticlly strts to connect to  rdio network. The integrl rdio is equipped with n

internl ntenn. The rdio signl strength cn be red vi the system. If the rdio signl

is not sufﬁcient, n externl ntenn must be connected. Plese see current documen-

ttion on vilble ntenns.

Mounting  communiction module in the meter my inﬂuence the rdio communic-

tion. Plese contct Kmstrup A/S.

With disconnect function

With this type of meter, it must be checked tht the red diode is switched off. This indi-

ctes tht the consumer’s supply is disconnected.

Kamstrup OMNIPOWER User Manual

Questions and Answers: