Kamstrup ULTRAFLOW 54 DN15-125 User Manual

ULTRAFLOW® 54 DN15-125
Kamstrup A/S · Technical description · 5512-2464_D1_GB_09.2021
11
2.5 Materials
Wetted parts. ULTRAFLOW® 54
Housing, threaded DZR brass (dezincification resistant brass), CW602N
Housing, flanged Stainless steel, W.Nr. 1.4308
Transducer (membrane) Stainless steel, W.Nr. 1.4404
O-ring Ethylene Propylene (EPDM)
Reflector base/Reflector Thermoplastic, 30 % glass fibre-reinforced Polyethersulfone (PESU 30 % GF)
and stainless steel, similar to AISI 304 or AISI 316/
Stainless steel, similar to AISI 304 or AISI 316
Measuring tube Thermoplastic, Polyethersulfone (PESU) – only flow sensor type 65-5-XXHX-
XXX)/
Thermoplastic, 30 % glass fibre-reinforced Polyethersulfone (PESU 30 % GF)
Electronics housing, ULTRAFLOW® 54
Base (flow sensor) Thermoplastic, 30% glass fibre-reinforced Polyethersulfone (PESU 30 % GF) –
only flow sensor type 65-5-XXHX-XXX/
Thermoplastic, 10 % glass fibre-reinforced Polycarbonate (PC 10 % GF)
Top cover (flow sensor) Thermoplastic, 10 % glass fibre-reinforced Polycarbonate (PC 10 % GF) – only
flow sensor type 65-5-XXHX-XXX/
Thermoplastic, 20 % glass fibre-reinforced Polycarbonate (PC 20 % GF)
Housing, Pulse Transmitter/Pulse Divider
Base, cover Thermoplastic, 10 % glass fibre-reinforced Polycarbonate (PC 10 % GF)
Cables
Signal cable Silicone cable (3 x 0.25 mm
2
)
Mains supply cable 24/230 VAC Cable with Polyvinylchloride (PVC)-mantle (2 x 0.75 mm²)
(optional when selecting mains-supplied Pulse Transmitter/ Pulse Divider)
Housing, Cable Extender Box
Base, cover Thermoplastic, Acrylonitrite butadiene styrene (ABS)

Kamstrup ULTRAFLOW 54 DN15-125 Specifications

General

Type	Ultrasonic flow sensor
Nominal diameter	DN15-125
Measurement Principle	Ultrasonic transit time
Pressure Rating	PN16
Protection Class	IP68
Temperature Range	0°C
Outputs	Pulse, M-Bus, Modbus
Power Supply	24 VAC/DC